User's Manual

- 36 -
- AP: The AP functions as a wireless hub to which wireless clients
can connect. The clients must make sure that they are configured
to match the AP’s wireless settings. The AP must be connected to
switch or other LAN segment patch cable.
- WDS: WDS operation as defined by the IEEE802.11 standard
has been made available. Using WDS it is possible to wirelessly
connect Access Points, and in doing so extend a wired
infrastructure to locations where cabling is not possible or
inefficient to implement.
- AP+WDS: It means the device can support WDS and AP Mode
simultaneously.
Mode
Default : AP mode
- Infrastructure: The wireless LAN serves as a wireless station
(infrastructure). Connected to a PC or a small LAN (no more than 5
PCs), it allows the PC or small LAN able to access the wireless
network via Access Point.
Network Type -
- Ad hoc: The wireless LAN will use the Ad hoc mode to operate.
Wireless stations associating to the access point must have the
same SSID. Enter a descriptive name for the wireless LAN.
SSID
Default : 802.11bgn-SSID
There are 20MHz and 40MHz bandwidths for cohesion
Channel Width
Default : 20MHz
Specify if the extension channel should be in the Upper or Lower
sideband
Control Sideband
Default : Upper (Unavailable)