User's Manual

- 32 -
URL Filtering
URL filter is used to deny LAN users from accessing the internet. Block those URLs which contain
keywords listed below.
Enable Port Forwarding
Check to enable Port Forwarding function.
IP Address
Enter the IP address in the field.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote system or
service.
Port Range
For TCP and UDP Services, enter the beginning of the range of port
numbers used by the service. If the service uses a
single port number, enter it in both the start and finish fields.
Comment
You may key in a description MAC address.
Apply Changes
A
fter completing the settings on this page, click Apply Changes button to
save the settings.
Reset
Click Reset button to restore to default values.
Current Port Forwading
Table
Shows the current Port Forwarding information.
Delete Selected
Click Delete Selected button to delete items which are selected.
Delete All
Click Delete All button to delete all the items.
Reset
Click Reset button to rest.