User's Manual

- 20 -

4. Installation and Removal of Transceiver Module

4-1 Installing the SFP/SFP+ Mini-GBIC Transceiver Module

Please follow these steps to install the SFP/SFP+ Mini-GBIC module:

1. Power on the Switch and place the Switch on a

at surface. Install the new SFP/SFP+ Mini-GBIC

module by inserting it into the slot and slid-ing it

in until it stops (See Figure 1). Press it rmly until

you hear the module snap into place. Never force,

twist or bend the SFP/SFP+ Mini-GBIC module. The

SFP/SFP+ Mini-GBIC module slides in smoothly and

the Switch will automatically detect the new module.

SFP/SFP+

Copper

Figure 1: Inserting the SFP/SFP+ Mini-GBIC Module

2. After the TP/Fiber connection is made successfully, check the LEDs to verify that if there is a link and

a proper connection at the port.

Please refer to the user’s manual for more about the Switch or mod-ule’s management.