User's Manual

User’s Manual of MGSD-10080F
395
Configuration mode Command List
aaa Authentication, Authorization and Accounting
access Access management
access-list Access list
aggregation Aggregation mode
alarm Alarm command.
banner Define a banner
clock Configure time-of-day clock
default Set a command to its defaults
do To run exec commands in the configuration mode
dot1x IEEE Standard for port-based Network Access Control
enable Modify enable password parameters
end Go back to EXEC mode
erps Ethernet Ring Protection Switching
exit Exit from current mode
help Description of the interactive help system
hostname Set system's network name
interface Select an interface to configure
ip Interface Internet Protocol configuration commands
ipmc IPv4/IPv6 multicast configuration
ipv6 IPv6 configuration commands
lacp LACP settings
line Configure a terminal line
lldp Link Layer Discover Protocol.
logging System logging message
loop-protect Loop protection configuration
mac MAC table entries/configuration
mep Maintenance Entity Point
monitor Monitoring different system events
mvr Multicast VLAN Registration configuration
mvrp Enable MVRP feature globally
nms
Enable and set the switch
＊
s NMS agent operation mode configuration.
no Negate a command or set its defaults
ntp Configure NTP
port-security This command is obsolete.
privilege Command privilege parameters
prompt Set prompt
ptp Precision time Protocol (1588)