Datasheet

2
MGSD-10080F
Up to 4K VLANs groups, out of 4094 VLAN IDs
Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
Private VLAN Edge (PVE)
Port Isolation
MAC-based VLAN
IP Subnet-based VLAN
Protocol-based VLAN
VLAN Translation
Voice VLAN
GVRP
• Supports Spanning Tree Protocol
STP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol,
spanning tree by VLAN
BPDU Filtering/BPDU Guard
• Supports Link Aggregation
802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (Static Trunk)
Maximum 5 trunk groups, up to 8 ports per trunk group
Up to 16Gbps bandwidth (Duplex Mode)
• Provides port mirror (1-to-1)
• Portmirroringtomonitortheincomingoroutgoingtrafcona
particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection(UDLD)
that monitors a link between two switches and blocks the ports
on both ends of the link if the link fails at any point between
the two devices
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
Layer 3 IP Routing Features
• Supports maximum 32 static routes and route summarization
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
IEEE 802.1p CoS
IP TOS / DSCP / IP Precedence
IP TCP/UDP port number
Redundant Ring, Fast Recovery for Critical Network Applications
The MGSD-10080F supports redundant ring technology and features strong,
rapid self-recovery capability to prevent interruptions and external intrusions.
It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection
Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s
network to enhance system reliability and uptime in various environments.
Office C
Office B
Office C
Office A
1000BASE-SX/LX Fiber Optic
1000BASE-T UTP
Server
IP Phone
NVR
Internet
1000
1000
1000
1000
ERPS for Ring IP Surveillance Application
Recovery Time < 10ms
ERPS for Ring IP Surveillance Application
Recovery Time < 10ms
Speed Dome
PC
MGSD-10080F
MGSD-10080F
MGSD-10080F
AC and DC Redundant Power to Ensure Continuous Operation
To enhance the operation reliability and flexibility, the MGSD-10080F is equipped
with one 100 ~ 240V AC power supply unit and two additional 36 ~ 60V DC power
input connectors for redundant power supply installation. The Redundant Power
Systems are specifically designed to handle the demands of high tech facilities
requiring the highest power integrity. Furthermore, with the 36~ 60V DC power
supply implemented, the MGSD-10080F can be applied as the telecom level
device that could be located in the electronic room.
Digital Input and Digital Output for External Alarm
The MGSD-10080F supports Digital Input, and Digital Output on the front panel.
The external alarm offers technicians the ability to use Digital Input to detect, and
log external device status (such as door intrusion detector) for the alarm as Digital
Output could be used to alarm if the MGSD-10080F has port link down, link up or
power failure.