Quick Guide

7
4. Terminal Setup
Tocongure the system,connectaserial cabletoaCOMport onaPCornotebook
computerandtotheDB9typeofserialportoftheManagedMetroSwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1: Managed Metro Switch Console Connectivity
A terminal program,such as Tera Term or PuTTY,is required to make the software
connectiontotheManagedMetroSwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud:115200
Databits:8
Parity:None
Stopbits:1
Flowcontrol:None
Figure 4-2: COM Port Conguration