User's Manual

User’s Manual of GS-6320 and MGS-6320 Managed Switches
60
The page includes the following fields:
Object Description
• Username
A string identifying the user name that this entry should belong to. The allowed string
length is 1 to 31. The valid user name is a combination of letters, numbers and
underscores.
• Password
The password of the user. The allowed string length is 1 to 31.
• Password (again)
Please enter the user’s new password here again to confirm.
• Privilege Level
The privilege level of the user.
The allowed range is 1 to 15. If the privilege level value is 15, it can access all
groups, i.e. that is granted the fully control of the device. But others value need to
refer to each group privilege level. User's privilege should be same or greater than
the group privilege level to have the access of that group.
By default setting, most groups privilege level 5 has the read-only access and
privilege level 10 has the read-write access. And the system maintenance (software
upload, factory defaults and etc.) needs user privilege level 15.
Generally, the privilege level 15 can be used for an administrator account, privilege
level 10 for a standard user account and privilege level 5 for a guest account.
Buttons
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the Users.
: Delete the current user. This button is not available for new configurations (Add new user).
Once the new user is added, the new user entry is shown on the Users Configuration page.
If you forget the new password after changing the default password, please press the “Reset”
button on the front panel of the Managed Switch for over 10 seconds and then release it. T
he
current setting including
VLAN will be lost and the Managed Switch will restore to the default
mode.