User's Manual

User’s Manual of GS-6320 and MGS-6320 Managed Switches
413
for the port of higher priority will be offered.
• Power Allocation
It can limit the port PoE supply wattage. Per port maximum value must be less
than 36W watts; total ports values must be less than the Power Reservation
value. Once power overload is detected, the port will automatically shut down
and continue to be in detection mode until Pad’s power consumption is lower
than the power limit value.
 GS-6320-8P2X 802.3at PoE Switch – PoE Port Configuration
802.3at PoE and Advanced PoE Power Output Mode Management
To meet the demand of various powered devices consuming stable PoE power, the GS-6320-8P2X PoE Switch series provides
three different PoE power output modes for selection.
 60W Force Power Output Mode (Pins 1, 2, 3, 6 + Pins 4, 5, 7, 8)
 30W End-span PoE Power Output Mode (Pins 1, 2, 3, 6)
 30W Mid-span PoE Power Output Mode (Pins 4, 5, 7, 8)
 MGS-6320-8HP2X 802.3bt PoE++ Switch – PoE Port Configuration
802.3bt PoE++ and Advanced PoE Power Output Mode Management
To meet the demand of various powered devices consuming stable PoE power, the MGS-6320-8HP2X PoE++ Switch series
provides five different PoE power output modes for selection.
 95W UPOE/PoH Power Output Mode (Pins 1, 2, 3, 6 + Pins 4, 5, 7, 8)
 90W 802.3bt PoE++ Power Output Mode (Pins 1, 2, 3, 6 + Pins 4, 5, 7, 8)
 60W Force Power Output Mode (Pins 1, 2, 3, 6 + Pins 4, 5, 7, 8)
 30W End-span PoE Power Output Mode (Pins 1, 2, 3, 6)
 30W Mid-span PoE Power Output Mode (Pins 4, 5, 7, 8)
This page allows user to set up PoE port attributes.