User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.2.1 Management
- 4.2.1.1 System Information
- 4.2.1.2 IP Configuration
- 4.2.1.3 IP Status
- 4.2.1.4 ARP
- 4.2.1.5 Users Configuration
- 4.2.1.6 Privilege Levels
- 4.2.1.7 NTP Configuration
- 4.2.1.8 Time Configuration
- 4.2.1.9 Time Configuration
- 4.2.1.10 UPnP
- 4.2.1.11 CPU Load
- 4.2.1.12 System Log
- 4.2.1.13 Detailed Log
- 4.2.1.14 Remote Syslog
- 4.2.1.15 SMTP Configuration
- 4.2.2 SNMP
- 4.2.3 RMON
- 4.2.4 DHCP Relay
- 4.2.5 DHCP server
- 4.2.6 Remote Management
- 4.2.1 Management
- 4.3 Switching
- 4.3.1 Port Management
- 4.3.2 Link Aggregation
- 4.3.3 VLANs
- 4.3.4 VLAN Translation
- 4.3.5 VLAN Translation Mappings
- 4.3.6 Private VLANs
- 4.3.7 VCL
- 4.3.8 GVRP
- 4.3.9 MRP
- 4.3.10 Spanning Tree
- 4.3.11 IGMP Snooping
- 4.3.12 MLD Snooping
- 4.3.13 MVR (Multicast VLAN Registration)
- 4.3.14 LLDP
- 4.3.15 MAC Address Table
- 4.3.16 Loop Protection
- 4.3.17 UDLD
- 4.3.18 Link OAM
- 4.3.19 CFM
- 4.3.20 sFlow
- 4.4 Routing
- 4.5 QoS
- 4.6 Security
- 4.7 POE
- 4.8 Ring
- 4.9 ONVIF
- 4.10 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A: Networking Connection
- APPENDIX B : GLOSSARY
User’s Manual of GS-6320 and MGS-6320 Managed Switches
34
GS-6320-8P2X)
Per 10/100/1000BASE-T RJ45 PoE port (Port-1 to Port-8)
LED Color Function
10/100/1000
LNK/ACT
Green
Lights:
To indicate the port is running at 10/100/1000Mbps and successfully
established.
Blinks:
To indicate that the switch is actively sending or receiving data over that port.
802.3at PoE
In-Use
Amber
Lights:
Lights to indicate the PoE port is working in 802.3at PoE+ mode(End-span)
and offers up to 36 watts of power.
Per 10GBASE-SR/LR SFP+ port (Port-9 to Port-10)
LED Color Function
1G/2.5G
LNK/ACT
Green
Lights: To indicate the port is running at 1000Mbps or 2500Mbps.
Blinks:
To indicate that the switch is actively sending or receiving data over that port.
10G
LNK/ACT
Amber
Lights:
To indicate the port is running at 10GMbps and successfully
Established.
MGS-6320-8HP2X / MGS-6320-8T2X
Per 10/100/1000B/2500ASE-T RJ45 PoE++ port (Port-5 to Port-8)
LED Color Function
1G/2.5G
LNK/ACT
Green
Lights:
To indicate the port is running at 1000Mbps or 2500Mbps and successfully
established.
Blinks:
To indicate that the switch is actively sending or receiving data over that port.
100
LNK/ACT
Amber
Lights:
To indicate the port is running at 10/100/Mbps and successfully established.
Blinks:
To indicate that the switch is actively sending or receiving data over that port.
802.3bt PoE
In-Use
Green
Lights:
Lights to indicate the PoE port is working in 802.3bt PoE++ or PoH mode and
offers up to 95 watts of power.
802.3at PoE
In-Use
Amber
Lights:
Lights to indicate the PoE port is working in 802.3at PoE+ mode (End-span)
and offers up to 36 watts of power.