User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.2.1 Management
- 4.2.1.1 System Information
- 4.2.1.2 IP Configuration
- 4.2.1.3 IP Status
- 4.2.1.4 ARP
- 4.2.1.5 Users Configuration
- 4.2.1.6 Privilege Levels
- 4.2.1.7 NTP Configuration
- 4.2.1.8 Time Configuration
- 4.2.1.9 Time Configuration
- 4.2.1.10 UPnP
- 4.2.1.11 CPU Load
- 4.2.1.12 System Log
- 4.2.1.13 Detailed Log
- 4.2.1.14 Remote Syslog
- 4.2.1.15 SMTP Configuration
- 4.2.2 SNMP
- 4.2.3 RMON
- 4.2.4 DHCP Relay
- 4.2.5 DHCP server
- 4.2.6 Remote Management
- 4.2.1 Management
- 4.3 Switching
- 4.3.1 Port Management
- 4.3.2 Link Aggregation
- 4.3.3 VLANs
- 4.3.4 VLAN Translation
- 4.3.5 VLAN Translation Mappings
- 4.3.6 Private VLANs
- 4.3.7 VCL
- 4.3.8 GVRP
- 4.3.9 MRP
- 4.3.10 Spanning Tree
- 4.3.11 IGMP Snooping
- 4.3.12 MLD Snooping
- 4.3.13 MVR (Multicast VLAN Registration)
- 4.3.14 LLDP
- 4.3.15 MAC Address Table
- 4.3.16 Loop Protection
- 4.3.17 UDLD
- 4.3.18 Link OAM
- 4.3.19 CFM
- 4.3.20 sFlow
- 4.4 Routing
- 4.5 QoS
- 4.6 Security
- 4.7 POE
- 4.8 Ring
- 4.9 ONVIF
- 4.10 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A: Networking Connection
- APPENDIX B : GLOSSARY
User’s Manual of GS-6320 and MGS-6320 Managed Switches
282
• No Summary
The value is true to configure the inter-area routes do not inject into this stub
area.
Buttons
Click to add new entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
4.4.8.4 Area Range
This is OSPF6 area range configuration table. It is used to summarize the intra area paths from a specific address
range in one summary-LSA(Type-0x2003) and advertised to other areas or configure the address range status as
'DoNotAdvertise' which the summary-LSA(Type-0x2003) is suppressed. The area range configuration is used for
Area Border Routers (ABRs) and only router-LSAs(Type-0x2001) and network-LSAs (Type-0x2002) can be
summarized. The AS-external-LSAs(Type-0x4005) cannot be summarized because the scope is OSPF6
autonomous system (AS). The AS-external-LSAs(Type-0x4007) cannot be summarized because the feature is not
supported yet
The displayed settings are:
Object Description
• Delete
Check to delete the entry. It will be deleted during the next save.
• Area ID
The OSPF6 area ID.
• Network Address
IPv6 network address.
• Mask Length
IPv6 network mask length.
• Advertised
When the value is true, it summarizes intra area paths from the address range in
one Inter-Area Prefix LSA(Type-0x2003) and advertised to other areas.
Otherwise, the intra area paths from the address range are not advertised to