User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.2.1 Management
- 4.2.1.1 System Information
- 4.2.1.2 IP Configuration
- 4.2.1.3 IP Status
- 4.2.1.4 ARP
- 4.2.1.5 Users Configuration
- 4.2.1.6 Privilege Levels
- 4.2.1.7 NTP Configuration
- 4.2.1.8 Time Configuration
- 4.2.1.9 Time Configuration
- 4.2.1.10 UPnP
- 4.2.1.11 CPU Load
- 4.2.1.12 System Log
- 4.2.1.13 Detailed Log
- 4.2.1.14 Remote Syslog
- 4.2.1.15 SMTP Configuration
- 4.2.2 SNMP
- 4.2.3 RMON
- 4.2.4 DHCP Relay
- 4.2.5 DHCP server
- 4.2.6 Remote Management
- 4.2.1 Management
- 4.3 Switching
- 4.3.1 Port Management
- 4.3.2 Link Aggregation
- 4.3.3 VLANs
- 4.3.4 VLAN Translation
- 4.3.5 VLAN Translation Mappings
- 4.3.6 Private VLANs
- 4.3.7 VCL
- 4.3.8 GVRP
- 4.3.9 MRP
- 4.3.10 Spanning Tree
- 4.3.11 IGMP Snooping
- 4.3.12 MLD Snooping
- 4.3.13 MVR (Multicast VLAN Registration)
- 4.3.14 LLDP
- 4.3.15 MAC Address Table
- 4.3.16 Loop Protection
- 4.3.17 UDLD
- 4.3.18 Link OAM
- 4.3.19 CFM
- 4.3.20 sFlow
- 4.4 Routing
- 4.5 QoS
- 4.6 Security
- 4.7 POE
- 4.8 Ring
- 4.9 ONVIF
- 4.10 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A: Networking Connection
- APPENDIX B : GLOSSARY
User’s Manual of GS-6320 and MGS-6320 Managed Switches
27
Switch Fabric
68Gbps/non-blocking
Throughput
50.59Mpps@ 64Bytes packet
Address Table
8K entries, automatic source address learning and aging
Shared Data Buffer
4.1Mbits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
10Kbytes
Power over Ethernet
PoE Standard
IEEE 802.3at PoE+ PSE (Port 1 to Port
4)
Backward compatible with IEEE 802.3af
PoE PSE
802.3bt PoE++ PSE (Port 5 to Port 8)
Backward compatible with IEEE 802.3at
PoE PSE
--
PoE Power Supply Type
802.3bt
UPOE/POH
End-span
Mid-span
Force
--
PoE Power Output
802.3bt Type-4 mode, Port-5 to Port-8:
maximum 90 watts
UPoE mode, Port-5 to Port-
8: maximum
95 watts
End-span mode: maximum 36 watts
Mid-span mode: maximum 36 watts
Force mode: maximum 60 watts
--
Power Pin Assignment
802.3bt: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
UPoE: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
PoE Power Budget
240 watts (max.) @ 25 degrees C
200 watts (max.) @ 50 degrees C
--
Number of 802.3bt Type-4 PDs
2 units
--
Number of 802.3bt Type-3 PDs
4 units
--
Number of 802.3at Type-2 PDs
8 units
--
PoE Management Functions
PoE System Management
PoE Port Status monitoring
Total PoE power budget control
Over Temperature Protection
PoE usage threshold and temperature
threshold
--
PoE Device Live Detection
Per port remote PD IP address
4 actions
- None
- PD reboot
- PR reboot and alarm
- Alarm
--
PoE Power Recycling
Yes, daily or predeinded schedule
--