User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.2.1 Management
- 4.2.1.1 System Information
- 4.2.1.2 IP Configuration
- 4.2.1.3 IP Status
- 4.2.1.4 ARP
- 4.2.1.5 Users Configuration
- 4.2.1.6 Privilege Levels
- 4.2.1.7 NTP Configuration
- 4.2.1.8 Time Configuration
- 4.2.1.9 Time Configuration
- 4.2.1.10 UPnP
- 4.2.1.11 CPU Load
- 4.2.1.12 System Log
- 4.2.1.13 Detailed Log
- 4.2.1.14 Remote Syslog
- 4.2.1.15 SMTP Configuration
- 4.2.2 SNMP
- 4.2.3 RMON
- 4.2.4 DHCP Relay
- 4.2.5 DHCP server
- 4.2.6 Remote Management
- 4.2.1 Management
- 4.3 Switching
- 4.3.1 Port Management
- 4.3.2 Link Aggregation
- 4.3.3 VLANs
- 4.3.4 VLAN Translation
- 4.3.5 VLAN Translation Mappings
- 4.3.6 Private VLANs
- 4.3.7 VCL
- 4.3.8 GVRP
- 4.3.9 MRP
- 4.3.10 Spanning Tree
- 4.3.11 IGMP Snooping
- 4.3.12 MLD Snooping
- 4.3.13 MVR (Multicast VLAN Registration)
- 4.3.14 LLDP
- 4.3.15 MAC Address Table
- 4.3.16 Loop Protection
- 4.3.17 UDLD
- 4.3.18 Link OAM
- 4.3.19 CFM
- 4.3.20 sFlow
- 4.4 Routing
- 4.5 QoS
- 4.6 Security
- 4.7 POE
- 4.8 Ring
- 4.9 ONVIF
- 4.10 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A: Networking Connection
- APPENDIX B : GLOSSARY
User’s Manual of GS-6320 and MGS-6320 Managed Switches
22
1.5 Product Specifications
GS-6320-8P2X
Product GS-6320-8P2X
Hardware Specifications
Copper Ports
8 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X interface with Port-1 to Port-8
SFP/mini-GBIC Slots
2 x 1G/2.5G/10GBASE-X SFP interfaces with Port-9 to Port-10
PoE Injector Port
8 ports with 802.3at/afPoE injector function with Port-1 to Port-8
Console
1 x RJ45 serial port (115200, 8, N, 1)
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Dimensions (W x D x H)
330 x 150 x 44.5mm, 1U height
Weight
1.6 KG
Power Requirements
100~240V AC, 50/60Hz
Power Consumption
Max. 14.8 watts/50.47BTU (Power on without any connection)
Max. 162watts/552.42BTU (Full loading with PoE+ function)
ESD Protection
6KV DC
LED
System:
R.O (Green),Ring (Green), SYS (Green), PWR (Green)
10/100/1000BASE-T RJ45 Interfaces (Port 1 to Port 8):
10/100/1000Mbps LNK/ACT (Green)
PoE-in-Use (Amber) (Port 1 to Port 8)
1G/2.5G/10G Mbps SFP Interfaces (Port 9 to Port 10):
1G/2.5G LNK/ACT (Green)
10G LNK/ACT (Amber)
Switching Specifications
Switch Architecture
Store-and-Forward
Switch Fabric
56Gbps/non-blocking
Throughput
41.67Mpps@ 64Bytes packet
Address Table
8K entries, automatic source address learning and aging
Shared Data Buffer
4.1Mbits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
9KB
Power over Ethernet
PoE Standard IEEE 802.3atPoE Plus, PSE
Backward compatible with IEEE 802.3af PoE PSE
PoE Power Supply Type
End-span
PoE Power Output
Per port 52V DC, max. 36 watts
Power Pin Assignment
1/2(+), 3/6(-)
PoE Power Budget
120 watts (max.) @ 25 degrees C
100 watts (max.) @ 50 degrees C