Datasheet

3
MGS-6320-8HP2X/MGS-6320-8T2X
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
– IEEE 802.1p CoS
– TOS/DSCP/IP Precedence of IPv4/IPv6 packets
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policing ontheswitchport
• DSCP remarking
Multicast
• Supports IPv4 IGMP Snooping v1, v2 and v3
• Supports IPv6 MLD Snooping v1 and v2
• Querier mode support
• IPv4IGMPSnoopingportltering
• IPv6MLDSnoopingportltering
• Multicast VLAN Registration (MVR) support
Security
• Authentication
– IEEE 802.1x Port-based/MAC-based network access
authentication
– Built-in RADIUS client to co-operate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCPSnoopingtolterun-trustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
• IPaddressaccessmanagement topreventunauthorized
intruder
Flexible and Extendable 10Gb Ethernet Solution
10G Ethernet is a big leap in the evolution of Ethernet. Each of the 10G SFP+
slots in the MGS-6320-Seriessupports triple speed and 10GBASE-SR/LR or
2500BASE-X and 1000BASE-SX/LX. With its 2-port,10G Ethernet link capability,
the administrator now can flexibly choose the suitable SFP/SFP+ transceiver
according to the transmission distance or the transmission speed required to
extendthenetworkefciently.TheMGS-6320-Seriesprovidesbroadbandwidthand
powerful processing capacity.
Outstanding 802.3bt PoE++ Solution
Complying with the IEEE 802.3at PoE+ and 802.3bt PoE++ technology, the MGS-
6320-8HP2X features four 10/100/1000BASE-T 802.3at PoE+ ports, and four
10/100/1000/2.5GASE-T 802.3bt PoE++ ports with each port powering up to 95
watts and a total PoE budget of up to 240 watts. It supports rich PoE operation
modes including 90-watt 802.3bt type-4 PoE++ ports, 95-watt PoH (Power over
HD-BASE-T) mode and 4-pair force mode to solve the incompatibility of non-
standard4-pairPoEPDsintheeld.
Built-in Unique PoE Functions for Surveillance Management
As a managed PoE Switch for various networks, the MGS-6320-8HP2X features
the following intelligent PoE management functions:
■PDAliveCheck
■ScheduledPowerRecycling
■SMTP/SNMPTrapEventAlert
■PoESchedule
■PoEUsageMonitoring
■PoEExtension
Intelligent Powered Device Alive Check
The MGS-6320-8HP2X can be configured to monitor a connected PD status in
real time via ping action. Once the PD stops working and responding, the MGS-
6320-8HP2X will resume the PoE port power and bring the PD back to work. It
will greatly enhance the network reliability through the PoE port resetting the PD’s
power source, thus reducing administrator management burden.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification