Datasheet
MGS-5220-8P2X
1
New Generation of Multigigabit PoE+ Managed Switch with Full PoE
Power Budget
MGS-5220-8P2X, PLANET’s rst Layer 2+ Managed Multigigabit Switch providing
2.5Gbps data rate and PoE over UTP cables, is designed for the demand of
high-bandwidth required network equipment, such as 802.11ac Wave 2 wireless
AP. Offering a perfect hardware configuration with with 8 100/1000/2500BASE-T
ports featuring 30-watt 802.3at PoE+, and 2 extra 1/10 Gigabit BASE-X SFP+
fiber slots, the MGS-5220-8P2X breaks the bandwidth limitation of connecting
the wireless network with the wired network. Featuring hardware-based Layer
3 static routing capability, Layer 2 and Layer 4 switching engine, and PLANET
Intelligent PoE functions, it provides a highly-secure, environment-friendly network
management and accelerates the deployment of wireless network infrastructure for
enterprises and smart cities.
2.5Gbps Cabability for Diversified Bandwidth Applications
With the terminal access rates of 802.11ac wireless APs reaching as high as
1.2Gbps to 2.6Gbps, Gigabit ports has been unable to satisfy the demand.
Supporting both 1Gbps and 2.5Gbps capability and 802.3af/at POE output, the
MGS-5220-8P2X can deliver not only data to 802.11ac wireless APs, but also
power to other powered devices such as APs and IP cameras.
L2+ 8-Port 2.5G 802.3at PoE + 2-Port 1G/10G SFP+ Managed
Multigigabit Switch
Physical Port
• 8-Port 100/1000/2500 BASE-T with 30W PoE injector
• 2-port 1/10 GBASE-X SFP+
• RS-232 RJ45 console interface for switch basic
management and setup
Power over Ethernet
• Up to 8 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 30.8 watts for each PoE port
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters
• PoE Management
–
PoE Port Status monitoring
–
Total PoE power budget control
–
Over Temperature Protection
–
PoE usage threshold
–
Temperature threshold
–
Per port PoE function enable/disable
–
PoE Port Power feeding priority
–
Per PoE port power limit
–
PD classication detection
–
Sequence port PoE
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame ow control (full-duplex)
• High performance of Store-and-Forward architecture and
runt/CRC ltering eliminates erroneous packets to optimize
the network bandwidth
• Storm Control support
–
Broadcast/Multicast/Unknown unicast
• Supports VLAN
–
IEEE 802.1Q tagged VLAN
–
Up to 255 VLANs groups, out of 4094 VLAN IDs
–
Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
–
Private VLAN Edge (PVE)
–
Protocol-based VLAN
–
MAC-based VLAN
–
Voice VLAN
• Supports Spanning Tree Protocol
–
STP, IEEE 802.1D Spanning Tree Protocol