User's Manual

- 22 -
Standard Transfer Speed Cable Requirement 100M
100BASE-FX Multi-mode 50/125μm or 62.5/125μm
100BASE-FX Single mode 9/125μm
100BASE-BX Multi-mode 50/125μm
1000BASE-SX Multi-mode 50/125μm or 62.5/125μm
Note
Be sure the connected network devices support MDI/MDI-X. If it does not support, then
use the crossover Category 5e cable.
Warning
Never pull out the SFP/SFP+ Transceiver module without pulling the handle or the push
bolts on the module. Directly pulling out the SFP/SFP+ Transceiver module would damage
the SFP/SFP+ Transceiver module of the device.