User's Manual

- 21 -

4-2 Remove the SFP/SFP+ Transceiver Module

1. Make sure there is no network activity by consulting or

checking with the network administrator.

2. Remove the Fiber Optic Cable gently (See Figure 2).

3. Turn the handle of the SFP/SFP+ Transceiver module to

the horizontal level.

4. Pull out the SFP/SFP+ Transceiver module gently through

the handle.

SFP/SFP+

Copper

Figure 2

4-3 Connecting the UTP Cable

The 1/2.5/5/10GBASE-T port uses RJ45 socket -- similar to phone jack -- for connection of unshielded

twisted-pair cable (UTP). The 802.3ab/802.3bz/802.3ae Ethernet standard requires Category 5 UTP for

100Mbps 100BASE-TX. 1/2.5/5/10GBASE-T uses Cat5e/6/7 UTP (see table below). Maximum distance

is 100 meters (328 feet).