PLANET Fiber Transceiver MFB-Series/MGB-Series/MTB-Series User’s Manual
Trademarks Copyright © PLANET Technology Corp. 2018 Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose.
and/or to the products de-scribed in this User’s Manual, at any time without notice. If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and sugges-tions. FCC NOTICE (Class B) This device complies with Part 15 of the FCC Rules.
WEEE Warning To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision User's Manual of PLANET SFP/SFP+ Mini-GBIC Transceiver For Models: MFB-SERIES/MGB-SERIES/MTB-SERIES Rev: 1.
Table of Contents 1. Overview.....................................................................................................................................................6 2. Checklist......................................................................................................................................................7 3. Introduction and Model List........................................................................................................................
1. Overview Thank you for purchasing PLANET SFP/SFP+ Mini-GBIC Transceiver which includes the Ethernet module of the MFB, MGB and MTB families. The MFB family’s Fast Ethernet SFP module can be installed into PLANET Switch products with 100BASE-FX SFP interface. The distance can be extended from 2km (multi-mode, LC) to up to 120km (sin-gle-mode, LC). The MGB family’s Gigabit Ethernet SFP module can be installed into PLANET Switch products with 1000BASE-SX/LX SFP interface.
2. Checklist Your SFP/SFP+ Package should contain the following items: zz The SFP/SFP+ Transceiver Module x 1 zz The User’s Manual x 1 If any item is missing or damaged, please consult the dealer from whom you purchased your SFP/SFP+ Mini-GBIC Ethernet transceiver module.
3. Introduction and Model List 3-1 The MFB-Series Mini-GBIC Transceiver Module List Fast Ethernet Transceiver (100BASE-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.
Fast Ethernet Transceiver (100BASE-BX, Single Fiber Bi-directional SFP) Model DDM Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp.
1. When shorter single mode fiber cables are used, you might need to insert an in-line optical attenuator in the link to avoid overloading the receiver. Follow the I-TUT G652 document for the same fiber cable length. 2. The attenuation coefficient mentioned in the following chapters is for reference only. Attenuation coefficient Wavelength region Typical link value 1260nm-1360nm 0.5 dB/km 1530nm-1565nm 0.
SFP Model MFB-F20 MFB-TF20 MFB-F40 MFB-F60 MFB-F120 10 < n < 20 2 dB 4-6 dB 8-10 dB 25-27 dB 20 < n < 40 -- 2-4 dB 6-8 dB 23-25 dB 40 < n < 60 -- -- 2-4 dB 18-20 dB Physical Fiber Cable Length “n” km SFP Model MFB-TSA MFB-TSB MFB-TFA10 MFB-TFB10 0.
3-2 The MGB-Series Mini-GBIC Transceiver Module List Gigabit Ethernet Transceiver (1000BASE-X SFP) Model DDM Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.
MGB-TSX YES 1000 LC Multi Mode 550m 850nm -40 ~ 75ºC MGB-TSX2 YES 1000 LC Multi Mode 2km 1310nm -40 ~ 75ºC MGB-TLX(V2) YES 1000 LC Single Mode 20km 1310nm -40 ~ 75ºC MGB-TL40 YES 1000 LC Single Mode 40km 1310nm -40 ~ 75ºC MGB-TL80 YES 1000 LC Single Mode 80km 1550nm -40 ~ 75ºC Gigabit Ethernet Transceiver (1000BASE-BX, Single Fiber Bi-directional SFP) Model DDM MGB-LA10(V2) MGB-LB10(V2) YES Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX)
MGB-LA20(V2) MGB-LB20(V2) MGB-LA40(V2) MGB-LB40(V2) MGB-LA80 MGB-LB80 MGB-TLA10(V2) MGB-TLB10(V2) MGB-TLA20 MGB-TLB20 YES YES YES YES YES 1000 WDM (LC) Single Mode 20km 1310nm 1550nm 0 ~ 60ºC 1000 WDM (LC) Single Mode 20km 1550nm 1310nm 0 ~ 60ºC 1000 WDM (LC) Single Mode 40km 1310nm 1550nm 0 ~ 60ºC 1000 WDM (LC) Single Mode 40km 1550nm 1310nm 0 ~ 60ºC 1000 WDM (LC) Single Mode 80km 1490nm 1550nm 0 ~ 60ºC 1000 WDM (LC) Single Mode 80km 1550nm 1490nm 0 ~ 60ºC 10
MGB-TLA40 MGB-TLB40 MGB-TLA80 MGB-TLB80 YES YES 1000 WDM (LC) Single Mode 40km 1310nm 1550nm -40 ~ 75ºC 1000 WDM (LC) Single Mode 40km 1550nm 1310nm -40 ~ 75ºC 1000 WDM (LC) Single Mode 80km 1490nm 1550nm -40 ~ 75ºC 1000 WDM (LC) Single Mode 80km 1550nm 1490nm -40 ~ 75ºC Physical Fiber Cable Length “n” km SFP Model MGB-LX MGB-L40 MGB-L80 MGB-L120 10 < n < 20 -- 5-7 dB 13-15 dB 25-27 dB 20 < n < 40 -- 3-5 dB 10-12 dB 23-25 dB 40 < n < 60 -- -- 5-7 dB 18-20 d
SFP Model Physical Fiber Cable Length “n” km MGB-TLX MGB-TL40 MGB-TL80 10 < n < 20 -- 5-7 dB 13-15 dB 20 < n < 40 -- 3-5 dB 10-12 dB 60 < n < 80 -- -- 5-7 dB MGB-LA10 MGB-LB10 MGB-TLA10 MGB-TLB10 MGB-LA20 MGB-LB20 MGB-TLA20 MGB-TLB20 MGB-LA40 MGB-LB40 MGB-TLA40 MGB-TLB40 MGB-LA60 MGB-LB60 MGB-TLA60 MGB-TLB60 MGB-LA80 MGB-LB80 MGB-TLA80 MGB-TLB80 10 < n < 20 -- 2 dB 4-6 dB 8-10 dB 13-15 dB 20 < n < 40 -- -- 2-4 dB 6-8 dB 10-12 dB 40 < n < 60 -- -- -- 2-4 dB 5-7 dB --
3-3 The MTB-Series Mini-GBIC Transceiver Module List 10Gbps SFP+ (10G Ethernet/10GBASE) Model DDM Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.
10Gigabit Ethernet Transceiver (10GBASE-BX, Single Fiber Bi-directional SFP) Model DDM MTB-LA20 MTB-LB20 YES MTB-LA40 MTB-LB40 YES MTB-LA60 MTB-LB60 YES Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp.
SFP Model MTB-LA20 MTB-LB20 MTB-LA40 MTB-LB40 MTB-LA60 MTB-LB60 10 < n < 20 2 dB 4-6 dB 8-10 dB 20 < n < 40 -- 2-4 dB 6-8 dB 40 < n < 60 -- -- 2-4 dB Physical Fiber Cable Length “n” km - 19 -
4. Installation and Removal of Transceiver Module 4-1 Installing the SFP/SFP+ Mini-GBIC Transceiver Module Please follow these steps to install the SFP/SFP+ Mini-GBIC module: 1. Power on the Switch and place the Switch on a flat surface. Install the new SFP/SFP+ Mini-GBIC module by inserting it into the slot and slid-ing it in until it stops (See Figure 1). Press it firmly until you hear the module snap into place. Never force, twist or bend the SFP/SFP+ Mini-GBIC module.
4-2 Removing the SFP/SFP+ Transceiver Module 1. Make sure there is no network activity by consulting or checking with the network administrator. 2. Remove the Fiber Optic Cable gently (See Figure 2). 3. Turn the handle of the SFP/SFP+ Transceiver module to the hori-zontal level. 4. Pull out the SFP/SFP+ Transceiver module gently through the han-dle.
4-3 Connecting the UTP Cable The 1/2.5/5/10GBASE-T port uses RJ45 socket -- similar to phone jack -- for connection of unshielded twisted-pair cable (UTP). The 802.3ab/802.3bz/802.3ae Ethernet standard requires Category 5 UTP for 100Mbps 100BASE-TX. 1/2.5/5/10GBASE-T uses Cat5e/6/7 UTP (see table below). Maximum distance is 100 meters (328 feet). Standard Transfer Speed Cable Requirement 100M 10GBASE-T 10000Mbit/s Cat 6A/7 5GBASE-T 5000Mbit/s Cat 6/6A/7 2.
Appendix A A.1 Fiber Optic Cable Connection Parameters The wiring details are shown below: Fiber Optic Patch Cables: Standard Fiber Type Cable Specifications 100BASE-FX Multi-mode 50/125μm or 62.5/125μm 100BASE-FX Single mode 9/125μm 100BASE-BX Multi-mode 50/125μm 1000BASE-SX Multi-mode 50/125μm or 62.5/125μm 1000BASE-LX Single mode 9/125μm 1000BASE-BX Single mode 9/125μm 10GBASE-SR Multi-mode 50/125μm or 62.
Safety Notice Fiber-optic SFP modules are equipped with a Class 1 laser, which emits invisible radiation. Read the following safety warning carefully. Note Class 1 Laser Product Complies with FDA Regulation 21 CFR 1040.10 and 1040.11 Class 1 radiation is present when the device or system is powered up. Warning Only trained and qualified personnel should be allowed to install or replace these modules.
