(V2) Quick Guide

- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
7. Starting Web Management
The following shows how to start up the Web
Management of the Managed Media Converter Chassis.
Note the Managed Media Converter Chassis is congured
through an Ethernet connection. Please make sure the
manager PC must be set to the same IP subnet address.
For example, the default IP address of the Managed Media
Converter Chassis is 192.168.0.100, then the manager
PC should be set to 192.168.0.x (where x is a number
between 1 and 254, except 100), and the default subnet
mask is 255.255.255.0.
Managed Media Converter Chassis
PC / Workstation with
Web Browser
192.168.0.x
IP Address:
192.168.0.100
RJ45 Management Port
2
10/100/1000BASE-T
Figure 7-1: IP Management Diagram
Logging in to the Managed Media Converter Chassis
1. Use Internet Explorer 8.0 or above Web browser and
enter IP address http://192.168.0.100 to access the
Web interface.
3. After entering the username and password (default user
name and password are “admin”) shown in Figure 7-2,
the Web main screen in Figure 7-3 appears.
Figure 7-3: Web Main Screen of Managed Media Converter
Chassis
2. When the following dialog box appears, please enter the
default user name and password “admin”. The login
screen in Figure 7-2 appears.
Default Username: admin
Default Password: admin
Note
The following screen is based on the MC-
1610MR for the MC-1610MR48 whose display is
the same as that of the MC-1610MR.
Figure 7-2: Login Screen
The Function Menu on the left of the Web page lets you
access all the commands and statistics the Media Converter
Chassis provides.
Figure 7-4: Function Menu
Now, you can use the Web management interface
to continue the Managed Media Converter Chassis
management, please refer to the user manual for more
details.
Note
For security reason, please change and
memorize the new password after this first
setup.
8.RecoveringBacktoDefault
 Conguration
 IPAddresshasbeenchangedoradminpassword
hasbeenforgotten–
To reset the IP address to the default IP address
“192.168.0.100” or reset the login user name/password
to default value, press the hard reset button on the front
panel for about 10 seconds. After the device is rebooted,
you can login the management Web interface within the
same subnet of 192.168.0.xx and default user name/
password.
1 2
10/100/1000BASE-T
38400, 8, N, 1
RESET
PWR
ON
PWR
FAIL
FAN
FAIL
MGM
CONSOLE
LINK/ACT
MC-1610MR
Hard Reset Button
9. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource at the PLANET Web site rst to
check if it could solve your issue. If you need more support
information, please contact PLANET Media Converter
support team.
PLANET online FAQ:
http://www.planet.com.tw/en/support/faq.php?type=3
Media Converter support team mail address:
[e-mail]
MC-1610MR/MC-1610MR48 User’s Manual:
http://www.planet.com.tw/en/support/download.
php?type1=3&model=22090&type=3
(Please select the Managed Media Converter Chassis model
name from the Product Model drop-down menu)
Copyright © PLANET Technology Corp. 2016.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.