User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HARDWARE INSTALLATION
- 3. MANAGED MEDIA CONVERTER CHASSIS MANAGEMENT
- 4. CONSOLE INTERFACE
- 5. WEB MANAGEMENT
- 6. LINK PASS THROUGH FUNCTION
- 7. TROUBLESHOOTING
- APPENDIX A NETWORKING CONNECTION
Figure 5-8 GST-80x Converter Status Web Page screen
Item Description
Device To enable or disable per GST-80x Converter board.
LLCF To enable or disable the LLCF function from GST-80x Converter board.
TP AN Mode To set the UTP port runs at Auto-negotiation or Forced Mode.
TP Speed＊ To set the UTP port runs at 1000Mbps,100Mbps or 10Mbps.
TP Duplex＊ To set the UTP port runs at Full duplex or Half duplex mode.
TP FC To set the Flow Control of the UTP port to enable or disable.
Fiber LLR To enable or disable the LLR function of the Fiber port.
Fiber AN Bypass To set the Auto negotiation bypass function of the fiber port to enable or disable.
Table 5-5 Descriptions of the GST-80x slot Configuration screen Objects
43