User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HARDWARE INSTALLATION
- 3. MANAGED MEDIA CONVERTER CHASSIS MANAGEMENT
- 4. CONSOLE INTERFACE
- 5. WEB MANAGEMENT
- 6. LINK PASS THROUGH FUNCTION
- 7. TROUBLESHOOTING
- APPENDIX A NETWORKING CONNECTION
4.2 Login in
Login is required to access the console interface after the self-test completes successfully. The factory default user name and
password is "admin". You may change the password by use “set pass” command. Please always enter the correct user name
and password. (See Figure 4-2)
Figure 4-2 Managed Media Converter Chassis login screen
4.3 Main Menu screen
After login the Managed Media Converter Chassis, the main menu screen shows as below.
Figure 4-3 Managed Media Converter Chassis Main Menu screen
23