User's Manual

- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Before start installing the Converter, verify the package
contains the following parts:
● TheMediaConverterChassisx1
● User'sManualx1
● MountingAccessory(for10/19”ChassisShelf)x1
● RubberFeetx4
● ACPowerCordx1
Ifanyofthesearemissingordamaged,pleasecontactyour
dealer immediately, if possible, retain the carton including
the original packing material, and use them against to
repacktheproductincasethereisaneedtoreturnittous
for repair.
3. Media Converter Chassis
Front Panel
Figure 3-1 & 3-2 & 3-3 shows a front panel of MC-700 /
MC-1500/MC-1500R/MC-1500R48.
Figure 3-1 MC-700 Front Panel
Figure 3-2 MC-1500 Front Panel
Figure 3-3 MC-1500R / 1500R48 Front Panel
6. Installing the Media Converter
Chassis
6.1 Installing Media Converter Chassis to
10/19-inch Wiring Closet Rack
» Installfourscrewsthroughmountingearsintoeachside.
» Locate Converter Chassis at 10/19-inch mounting rails
andscrewupthefrontbrackets.
» Set Main power switch at “OFF” position before
connectingthepowercord.
Figure 6-1 InstallingMediaChassisinWiringClosetRails
5. Media Converter Chassis
Rear Panel
Figure 5-1 & 5-2 & 5-3 shows a front panel of MC-700 /
MC-1500/MC-1500R/MC-1500R48.
The rear panel of the MC-700 is with one fan, one ON/
OFF Switch and a power inlet that accept 100~240V AC,
50/60Hzpowerinput.
Figure 5-1 MC-700 Rear Panel
The rear panel of the MC-1500 is with two fans, one ON/
OFF Switch and a power inlet that accept 100~240V AC,
50/60Hzpowerinput.
Figure 5-2 MC-1500 Rear Panel
2. Product Features
● Highquality10" / 19”Rack-MountableChassisinstallation
● Supports up to seven (7) / fteen (15) hot-swappable
mediaconverters
● One fan brings the air-ow for system cooling, and LED
indicatorsforsystemandfanstatus(MC-700)
● Two fan brings the air-ow for system cooling, and LED
indicatorsfor systemandfan status(MC-1500/1500R /
1500R48)
● Thepowerslotatrearpanelforredundantpowersupport
with options of 100~240V AC or -48V DC supplies
(MC-1500R/1500R48)
● Bay power isolation, ensure each bay is electrically
isolatedfromeachother
● Support multiple converters with 10/100/1000Mbps,
copper,Fiber,single/multi-modeST/SC/SFPconnectors
● Reducethe effort ofconverter maintenance andmanage-
ment,diagnosethestatusatonetime
● Cost-effective,easyinstall
4. LED Indicators
MC-700
Printing
LED
Status
Description
PWR
ON Thechassisispowered.
OFF
Thechassisisnotpoweredorpower
failure,iftheACoutletiswith
100~240VACvoltage.Pleaseconsult
yourlocaldealerifpowerfailure.
FAN
ON Thefanisfunctionalok.
OFF
Thefanisnotpoweredoritis
malfunction.IfthefanLEDremains
offwhilepowerison.Pleaseconsult
yourlocaldealertoreplacetheFAN.
MC-1500 Series
Printing
LED
Status
Description
PWR
ON Thechassisispowered.
OFF
Thechassisisnotpoweredorpower
failure.
FANA/
FANB
ON ThefanisfunctionalO.K.
OFF
Thefanisnotpoweredoritis
malfunction.IfthefanLEDremains
offwhilepowerison.Pleaseconsult
yourlocaldealertoreplacetheFAN.
TherearpaneloftheMC-1500R/1500R48.
Figure 5-3 MC-1500R / 1500R48 Rear Panel
Note
1.TheMC-1500Rshippedwithone100~240V
ACpowersupplymodule(MC-15RPS130).
2.TheMC-1500R48shippedwithoneDC-48V
powersupplymodule(MC-15RPS48).
Power
Notice
1.Thedeviceisapower-requireddevice,it
means,itwillnotworktillitispowered.
Ifyournetworksshouldactiveallthe
time,pleaseconsideruseaproperUPS
(UninterruptedPowerSupply)foryour
device.Itwillpreventyoufromnetwork
datalossornetworkdowntime.
2.Insomearea,installingasurge
suppressiondevicemayalsohelpto
protectyourchassisfrombeingdamaged
byunregulatedsurgeorcurrenttothe
converterorthepoweradapter.
6.2 Installing Converters to the Media Converter
Chassis
» TurnofftheConverterChassispower.
» Verify the Media Converter is right for this Chassis and
locate +5VDC power jack on converter back, carefully
slide in and plug to match 10”/19” Chassis slot +5V
DC receptacle. Push up the picket fence to lock the
converters.
Note
The slide-in Media Converters and Converter
Chassis should be supplied only from PLANET,
both Media Converters and Chassis are built
tomatcheachotheratdimensions, DCpower
jack,andDCreceptacleandpowersafety.
» Ensurethatthereisnoactivityinthenetwork.
» Connectthemediacablefornetworkconnection.
» Turnonthechassispower,the PowerLED,andbothFAN
LEDindicatorswilllightup.