Media Converter Chassis MC-700 & MC-1000R & MC-1500 User’s Manual
Trademarks Copyright © PLANET Technology Corp. 2008. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose.
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Table of Contents 1. Overview .................................................................................. 5 2. Checklist .................................................................................. 6 3. Panel Description........................................................................ 7 4. Installation...............................................................................11 4.1 Installing Media Converter Chassis to 10/19-inch Wiring Closet Rack ...................................
1. Overview The 10/19-inch Media Converter Chassis, MC-700, MC-1000R & MC1500 is designed to accommodate 7/10/15 units of various type media converter at a central location for multiple segments cross connection. Independent power supply in each bay of the MC-700/MC-1000R/MC1500, you can freely install the converters without interrupting the rest of networks.
2. Checklist Before you start installing the Converter, verify that the package contains the following: • The Media Converter Chassis • Mounting Accessory (for 10/19” Chassis Shelf) • This User’s Manual • AC Power Cord Please notify your sales representative immediately if any of the abovementioned items is missing or damaged.
3. Panel Description The front panel of the MC-700 is as below: • 7 open slots for media converters • 2 LED indicators for system and fans Fig. 1 Front View of 10-inch Converter Chassis MC-700 LED indications: Printing PWR FAN LED Status Description ON The chassis is powered. OFF The chassis is not powered or power failure if the AC outlet is with 100~240V AC voltage. Please consult your local dealer if power failure. ON The fan is functional ok.
The rear panel of the MC-700 is with one fan, one ON/OFF Switch and a power inlet that accept 100~240V AC, 50/60Hz power input. Fig. 2 Rear view of MC-700 The front panel of the MC-1000R is as below: • 10 open slots for media converters • 3 LED indicators for system and fans Fig.
LED indications: Printing PWR FAN A / FAN B LED Status Description ON The chassis is powered. OFF The chassis is not powered or power failure if the AC outlet is with 100~240V AC voltage. Please consult your local dealer if power failure. ON The fan is functional O.K. OFF The fan is not powered or it is malfunction. If the fan LED remains off while power is on. Please consult your local dealer to replace the FAN.
LED indications: Printing PWR FAN A / FAN B LED Status Description ON The chassis is powered. OFF The chassis is not powered or power failure if the AC outlet is with 100~240V AC voltage. Please consult your local dealer if power failure. ON The fan is functional O.K OFF The fan is not powered or it is malfunction. If the fan LED remains off while power is on. Please consult your local dealer to replace the FAN.
4. Installation 4.1 Installing Media Converter Chassis to 10/19-inch Wiring Closet Rack • Install four screws through mounting ears into each side • Locate Converter Chassis at 10/19-inch mounting rails and screw up the front brackets • Set Main power switch at “OFF” position before connecting the power cord 4.
4.3 Converter Check point Attach the fiber cable. The Tx, Fiber Rx fiber cable must be paired at Port both ends TP Port Attach UTP Cat. 3 or 5 cable to TP port MPR: To a Hub or Repeater DTE: To a workstation or NIC Slide switch “DTE”/”MPR” is on the side panel. Default: MPR BNC Port Note 12 Attach T-Connector to BNC port and connect the RG-58 coaxial network. Ensure the coaxial cable/ segment is terminated at both ends properly. 2.5mm DC Receptacle 2.5mm +5V for each slot DC receptacle is 2.
Fig. 7 Installing MC-700 in 10-inch Wiring Closet Rails Fig.
5. MC-700 Converter Chassis Specifications Dimension 217 mm x 88.5 mm x 140 mm (W x H x D) Converter slots 7 slots Power Input 100~240V AC, 50/60Hz Power Dissipation 22 watt maximum Power Output per slot +5V DC DC Plug per slot 2.
6. MC-1000R Converter Chassis Specifications Dimension 440 mm x 125 mm x 220 mm (W x H x D) Converter slots 10 slots Power Input 100~240V AC, 50/60Hz Power Dissipation 100 watts / one power unit Power Output per slot +5V DC DC Plug per slot 2.
7. MC-1500 Converter Chassis Specifications Dimension 438 mm x 103 mm x 200 mm (W x H x D) Converter slots 15 slots Power Input 100~240V AC, 50/60Hz Power Dissipation 100 watt maximum Power Output per slot +5V DC DC Plug per slot 2.
