User's Manual

User’s Manual of LRP-822CS/LRP-1622CS
57
SNTP messages between the clients and the server when they are not
on the same subnet domain.
Disabled: Disable SNTP mode operation.
 Manual Time
To set time manually.
ear.
y.
 hour.
 Minutes - Select the starting minute.
 Seconds - Select the starting seconds.
 Year - Select the starting Y
 Month - Select the starting month.
 Day - Select the starting da
Hours - Select the starting
 Time Zone
Allows to select the time zone according to the current location of switch.
 Daylight Saving Time
This is used to set the clock forward or backward according to the configurations
set below for a defined Daylight Saving Time duration. Select 'Disable' to disable
the Daylight Saving Time configuration. Select 'Recurring' and configure the
Daylight Saving Time duration to repeat the configuration every year. Select
'Non-Recurring' and configure the Daylight Saving Time duration for single time
configuration. (Default : Disabled ).
 Daylight Saving Time
Offset
Enter the number of minutes to add during Daylight Saving Time. ( Range: 1 to
1440 )
 Recurring From  Week - Select the starting week number.
 Day - Select the starting day.
 Month - Select the starting month.
 Hours - Select the starting hour.
 Minutes - Select the starting minute.
 Recurring To  Week - Select the starting week number.
 Day - Select the starting day.
 Month - Select the starting month.
 Hours - Select the starting hour.
 Minutes - Select the starting minute.
 Non-recurring From  Week - Select the starting week number.
 Day - Select the starting day.
 Month - Select the starting month.
 Hours - Select the starting hour.
 Minutes - Select the starting minute.
 Non-recurring To  Week - Select the starting week number.
 Day - Select the starting day.
lect the starting month.
 Minut
 Month - Se
 Hours - Select the starting hour.
es - Select the starting minute.