User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of LRP-822CS/LRP-1622CS
53
4.2.3 IPv6 Configuration
The IPv6 Configuration includes Auto IPv6 Address and Gateway. The configured column is used to view or
uration. Fill out The screens in Figure
4-2-4 & Figure 4-2-5 appear.
Configuration,
change the IPv6 config the Auto Configuration, IPv6 Address and Gateway for the device.
F
following fields:
igure 4-2-4 IPv6 Address Setting Page Screenshot
The page includes the
Object Description
Auto Configuration
Enable IPv6 auto-configuration by checking this box.
If it fails, the configured IPv6 address is zero. The router may delay responding to
a router solicitation for a few seconds; the total time needed to complete
nfiguration can be significantly longer. auto-co
IPv6 Address
Provide the IPv6 address of this switch.
IPv6 address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'.
The symbol '::' is a special syntax that can be used as a shorthand way of
representing multiple 16-bit groups of contiguous zeros; but it can only appear
once. It also uses the following legally IPv4 address. For example, '::192.1.2.34'.
P d range is 1 through 128. rovide the IPv6 Prefix of this switch. The allowe
Gateway
Provide the IPv6 gateway address of this switch.
To enabl
e this LRP Managed Switch to accept a configuration from a Dynamic
tion Protocol version 6 (DHCPv6) server. By default, the LRP
client actions. DHCPv6 clients
xes that they can push to individual local
hosts.
DHCPv6 Client
Host Configura
Managed Switch does not perform DHCPv6
request the delegation of long-lived prefi