User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of LRP-822CS/LRP-1622CS
341
4.16.2 Reboot Switch
e rebooted from a remote location. Once the Reboot button is pressed, user has to
oot the
The Reboot page enables the device to b
re-login the Web interface for about 60 seconds. The Reboot Switch screen in Figure 4-16-2 appears and click to reb
system.
Figure 4-16-2 Reboot Switch Page Screenshot
anager
his function allows backup of the current image or configuration of the LRP Managed Switch to the local management station.
he Backup Manager screen in Figure 4-16-3 appears.
4.16.3 Backup M
T
T
Figure 4-16-3 Backup Manager Page Screenshot
he page includes the following fields:
T
Object Description
Backup Method
Select backup method from this drop-down list.
Server IP
Fill in your TFTP server IP address.
Backup Type
Select backup type.
Image
Select active or backup image.
Buttons
: Click to back up image, configuration or log.