User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of LRP-822CS/LRP-1622CS
292
Buttons
: Click to add ACE list
Figure 4-10-12 CE Table Page Screenshot
The page includes the following fields:
IPv6-based A
Object Description
ACL Name
Display the current ACL name
Display
the current sequence
Sequence
Action
ction Display the current a
Display
the current protocol
Protocol
Display
the current source IP address
Source IP Address
Display
the current source IP address wildcard mask
Source IP Address
Wildcard Mask
Destination IP Address
Display the current destination IP address
Destination IP Addre
rd Mask
ss wildcard mask
ss
Display the current destination IP addre
Wildca
Source Port Range
Display the current source port range
Display
the current destination port range
Destination Port
Range
Display
the current flag set
Flag Set
Display
the current DSCP
DSCP
Display
the current IP precedence
IP Precedence
ICMP Type
pe Display the current ICMP Ty
ICMP Code
Display the current ICMP code
Modify
Click
to edit IPv6-based ACL parameter.
Click
to delete IPv6-based ACL entry.