User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of LRP-822CS/LRP-1622CS
254
Buttons
: Click to apply changes.
Figure 4-9-45 Option 82 Global Setting Page Screenshot
The page includes the following fields:
Object Description
Option 82 Remote ID
Display the current option 82 remote ID
4.9.7.9 Option 82 Port Setting
request message which contains
option 82. The drop mode means that if the message has option 82, then the system will drop it without processing; keep mode
means that the system will keep the original option 82 segment in the message, and forward it to the server to process; replace
mode means that the system will replace the option 82 segment in the existing message with its own option 82, and forward the
message to the server to process. Option 82 Port Setting screens in Figure 4-9-46 & Figure 4-9-47 appear.
This function is used to set the retransmitting policy of the system for the received DHCP
Figu Option 82 Global Setting Page Screenshot
re 4-9-46