User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of LRP-822CS/LRP-1622CS
240
ent Access Method
4.9.6.1 Profile Rules
The Profile Rule Table Setting and Table screens in Figure 4-9-29 & Figure 4-9-30 appear.
4.9.6 Managem
Figure 4-9-29 Profile Rule Table Setting Page Screenshot
The pag s the following fields: e include
Object Description
Access Profile Name
(1-32 characters)
Indicates the access profile name
Priority (1-65535)
Set priority. The allowed value is from 1 to 65535
Management Method
Indicates the host can access the switch from HTTP/HTTPs/telnet/SSH/SNMP/All
interface that the host IP address matched the entry.
Action
An IP address can contain any combination of permit or deny rules.
(Default: Permit rules)Sets the access mode of the profile; either permit or deny.
Port
Select port from this drop-down list
IP-Source
Indicates the IP address for the access management entry
Buttons
: Click to apply changes.
Figure 4-9-30 Profile Rule Table Page Screenshot