User's Manual

Table Of Contents
User’s Manual of LRP-822CS/LRP-1622CS
189
4.7.7.1 Multicast Profile Setting
The Add Profile and Profile Status screens in Figure 4-7-36 & Figure 4-7-37 appear.
Figure 4-7-36 Add Profile Setting Page Screenshot
s the following fields: The page include
Object Description
Select IPv4 or IPv6 from this drop-down
list
IP Type
Profile Index
Indicates the ID of this particular profile
Group from
Specifies multicast groups to include in the profile. Specify a multicast group range by
entering a start IP address.
Group to
Specifies multicast groups to include in the profile. Specify a multicast group range by
entering an end IP address.
Sets the access mode of the profile; either permit or deny.
Action
- Permit
Multicast join report
s are processed when a multicast group falls
within the controlled range.
- Deny
When the acc
ess mode is set to, multicast join reports are only
processed when the multicast group is not in the controlled range.
Buttons
: Click to add multicast profile entry.
Figure 4-7-37 IGMP/MLD Profile Status Page Screenshot