User's Manual

User’s Manual of LRP-822CS/LRP-1622CS
102
Port Aggregation optimizes port usage by linking a group of ports together to form a single Link Aggregated Groups (LAGs).
Port Aggregation multiplies the bandwidth between the devices, increases port flexibility, and provides link redundancy.
Each LAG is composed of ports of the same speed, set to full-duplex operations. Ports in a LAG can be of different media types
(UTP/Fiber, or different fiber types) provided they operate at the same speed.
Aggregated Links can be assigned manually (Port Trunk) or automatically by enabling Link Aggregation Control Protocol
(LACP) on the relevant links.
ggregated Links are treated by the system as a single logical port. Specifically, the Aggregated Link has similar port attributes
-negotiation, speed, suplex setting, etc.
The devi rts the following Aggr
LAGs (Port Trunk) –
regation Control AG negotiate Aggregated Port links with other LACP
ted on a different re also LACP ports, the devices establish a LAG
4.4 Link Aggregation
A
to a non-aggregated port, including auto
ce suppo egation links :
 Static Force aggregated selected ports to be a trunk group.
 Link Agg Protocol (LACP) LAGs - LACP L
ports loca device. If the other device ports a
between them.
Figure 4-4-1 Link Aggregation