Quick Guide

7
5.ConguringIPAddressviatheConsole
TheLRPManagedSwitchisshippedwithdefaultIPaddressasfollows:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the currentIP address or modify a newIP addressfor the Switch, please
usetheproceduresasfollows:
 Show the current IP address
1.Atthe“LRP-series#”prompt,enter“show ip”.
2.The screendisplaysthe currentIP address,Subnet Maskand Gateway as shown
inFigure5-1.
Figure 5-1: IP Information Screen
 ConguringIPaddress
3.Atthe“LRP-series#”prompt,enter“congure”.
4.Atthe“LRP-series (cong)#”prompt,enterthefollowingcommandandpress
<Enter>asshowninFigure5-2.
LRP-series(cong)# ip address 192.168.1.100 mask 255.255.255.0
LRP-series(cong)# ip default-gateway 192.168.1.254