Quick Guide

12
8. Starting Long Reach PoE Communication
Thefollowingshows howtostartup theLong Reach PoE Communication ofthe
LRPManagedSwitchfromWebManagement.
Note
The LRP Managed Switch is configured DISABLED Long Reach PoE
functionasdefault.
 Connect the Coaxial Cable
1.Insert the coaxialcable with oneside being the 75ΩBNC plugconnector into the
LongReachEthernetcoaxialinterface.
2.Connect the other end of the cable to a device with Long Reach Ethernet
coaxial extenderinstalled.
3.TighttheBNCmaleconnectorgently.
5C2V/RG6 75Ω Coaxial Cable
RJ45
PoE PT Camera
Long Reach Power over Ethernet
2
1
LRP-822CS
LRP-101CE