Datasheet

ManualsBrandsPLANET Technology ManualsLong Reach POE8-port Coax + 2-port 10/100/1000T + 2-port 100/1000X SFP Long Reach PoE over Coaxial Managed Switch

LRP-822CS

Multi-channel Long Reach Power over Ethernet

To support the enterprises in easily building a multi-channel and centrally-controlled Long

Reach PoE system, the LRP-822CS works with the Long Reach PoE Extenders, LRP-

101CE, via its 8 BNC ports being the Long Reach PoE injectors for all connected LRP

Extenders. Each of the BNC port features long range data and power transmission for

distance up to 1,000m (3,280ft) over coaxial cable to the LRP Extender, and another

100m over Ethernet cable to remote PoE IP camera, PoE wireless AP or access control

systems complied with 802.3af/at PoE.

Centralized Power Management

With the centrally-managed 240-watt PoE budget, the LRP-822CS eliminates the need

for an additional remote site power while allowing a single power source to provide

power to both LRP extenders and the PoE powered devices at long range. The Long

Reach PoE capabilities provided help to reduce installation time and deployment costs

for network devices as a result of freeing from restrictions of power outlet locations.

Daisy-chaining Multiple Nodes

PLANET Long Reach PoE solution can easily build a power system for centrally-

controlled IP cameras in a high availability network infrastructure. It gives users the

exibilitytoexpandsmallareanetworkwithBNCT-connectorforsharingfournodesper

port when needed, making the LRP-822CS with 8 BNC Long Reach PoE Ports an ideal

support for up to 32 IP cameras.

Built-in Unique PoE Functions for Powered Devices Management

As a managed PoE switch for surveillance, wireless and VoIP networks, the LRP-822CS

particularly features the following special PoE Management functions to accomplish a

highly-efcientLongReachnetwork:

• PD Alive Check

• Scheduled Power Recycling

• PoE Schedule

• PoE Usage Monitoring

Intelligent Powered Device Alive Check

The LRP-822CS can be configured to monitor connected PD (Powered Device) status

in real time via ping action. Once the PD stops working and responding, the LRP-

822CS will resume the PoE port power and bring the PD back to work. It will greatly

enhance the network reliability through the PoE port resetting the PD’s power source

and reducing administrator management burden.

UTP

100m

UTP

100m

UTP

100m

UTP

100m

LRP-101CE

PoE

IP Camera

LRP-101CELRP-822CS

Power over Coaxial

802.3at PoE+

Coaxial

100m

Coaxial

Up to 1km

Coaxial

Up to 1km

Coaxial

Up to 1km

UTP

100m

Coaxial

100m

Long Reach Power over Ethernet

PoE IP Camera

Long Reach Power over Ethernet

• Trafcclassication

–

IEEE 802.1p CoS

–

ToS / DSCP / IP Precedence of IPv4/IPv6 packets

• Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

• Supports IGMP snooping v2 and v3

• Supports MLD snooping v1, v2

• IGMP querier mode support

• IGMPsnoopingportltering

• MLDsnoopingportltering

Security

• Authentication

–

IEEE 802.1X Port-based network access authentication

–

Built-in RADIUS client to co-operate with the RADIUS servers

–

RADIUS / TACACS+ login user access authentication

• Access Control List

–

IPv4 / IPv6 IP-based ACL

–

MAC-based ACL

• MAC Security

–

Static MAC

–

MACltering

• PortsecurityforsourceMAC addressentriesltering

• DHCPsnoopingtolteruntrustedDHCPmessages

• Dynamic ARP inspection discards ARP packets with invalid MAC

address to IP address binding

• IPsourceguardpreventsIPspoongattacks

• DoS attack prevention

• SSH / SSL

Management

• IPv4 and IPv6 dual stack management

• Switch management interface

–

Web switch management

–

Telnet command line interface

–

SNMP v1, v2c and v3

–

SSH / SSL secure access

• User privilege levels control

• Built-in Trivial File Transfer Protocol (TFTP) client

• BOOTP and DHCP for IP address assignment

• System maintenance

–

Firmware upload/download via HTTP / TFTP

–

Congurationupload/downloadthroughWebinterface

–

Dual images

–

Hardware reset button for system reboot or reset to factory default

• SNTP Network Time Protocol

• Cable diagnostics

• Link Layer Discovery Protocol (LLDP) and LLDP-MED

• SNMPtrapforinterfacelinkupandlinkdown notication

• Event message logging to remote Syslog server

• Four RMON groups (history, statistics, alarms and events)

• PLANET Smart Discovery utility

• Smart fan with speed control