User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
User’s Manual of LRP-422CST
Sample Interval
Display the current interval
Sample Type
Display the current sample type
Rising Threshold
Display the current rising threshold
Falling Threshold
Display the current falling threshold
Rising Event
Display the current rising event
Falling Event
Display the current falling event
Owner
Display the current owner
Action
Click to delete RMON alarm entry
4.14.5 RMON History
Configure RMON History table on this page. The RMON History screens in Figure 4-14-7 & Figure 4-14-8 appear.
Figure 4-14-7: RMON History Table Page Screenshot
The page includes the following fields:
Object Description
Select Index
Select index from this drop-down list to create the new index or modify the index
Index
Indicates the index of the history entry
Sample Port
Select port from this drop-down list
Bucket Requested
Indicates the maximum data entries associated this History control entry stored in
RMON. The range is from 1 to 50, default value is 50
347