User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
User’s Manual of LRP-422CST
Management Method
Indicates the host can access the switch from HTTP/HTTPs/telnet/SSH/SNMP/All
interface that the host IP address matched the entry.
Action
An IP address can contain any combination of permit or deny rules.
(Default: Permit rules)Sets the access mode of the profile; either permit or deny.
Port
Select port from this drop-down list
IP-Source
Indicates the IP address for the access management entry
Buttons
: Click to apply changes.
Figure 4-9-32 Profile Rule Table Page Screenshot
The page includes the following fields:
Object Description
Access Profile Name
Display the current access profile name
Priority
Display the current priority
Management Method
Display the current management method
Action
Display the current action
Port
Display the current port list
Source IPv4
Display the current source IPv4 address
Source IPv4 Mask
Display the current source IPv4 mask
Source IPv6
Display the current source IPv6 address
Source IPv6 Prefix
Display the current source IPv6 prefix
Modify
Click
to edit profile rule parameter
Click
to delete profile rule entry
256