User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
User’s Manual of LRP-422CST
The page includes the following fields:
Object Description
OUI Address
Display the current OUI address
Description
Display the current description
Modify
Click
to edit voice VLAN OUI group parameter
Click
to delete voice VLAN OUI group parameter
4.8.5.4 Telephony OUI Port Setting
The Voice VLAN feature enables voice traffic forwarding on the Voice VLAN, then the switch can classify and schedule network
traffic. It is recommended that there be two VLANs on a port - one for voice and one for data. Before connecting the IP device to
the switch, the IP phone should configure the voice VLAN ID correctly. It should be configured through its own GUI. The
Telephony OUI MAC Setting screens in Figure 4-8-26 & Figure 4-8-27 appear.
Figure 4-8-26 Voice VLAN Port Setting Page Screenshot
The page includes the following fields:
Object Description
Port
Select port number for this drop down list
State
Enable or disable the voice VLAN port setting. The default value is "Disabled".
CoS Mode
Select the current CoS mode
Buttons
: Click to apply changes.
226