User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
User’s Manual of LRP-422CST
4.7.2.7 IGMP Forward All
This page provides IGMP Forward All. The Forward All screen in Figure 4-7-20 appears.
Figure 4-7-20 Forward All Setting Page Screenshot
The page includes the following fields:
Object Description
VLAN ID
Select VLAN ID from this drop-down list to assign IGMP membership
Port
The switch port number of the logical port
Select IGMP membership for each interface:
Forbidden:
Interface is forbidden from automatically joining the IGMP via MVR.
None:
Interface is not a member of the VLAN. Packets associated with this
VLAN will not be transmitted by the interface.
Membership
Static:
Interface is a member of the IGMP.
186