User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
User’s Manual of LRP-422CST
Buttons
: Click to apply changes.
Figure 4-6-11 CIST Port Status Page Screenshot
The page includes the following fields:
Object Description
Port
The switch port number of the logical STP port
Identifier (Priority / Port ID)
Display the current identifier (Priority / Port ID)
External Path Cost Conf/Oper
Display the current external path cost conf/oper
Internal Path Cost Conf/Oper
Display the current internal path cost/oper
Designated Root Bridge
Display the current designated root bridge
External Root Cost
Display the current external root cost
Regional Root Bridge
Display the current regional root bridge
Internal Root Cost
Display the current internal root cost
Designated Bridge
Display the current designated bridge
Internal Port Path Cost
Display the current internal port path cost
Edge Port Conf/Oper
Display the current edge port conf/oper
P2P MAC Conf/Oper
Display the current P2P MAC conf/oper
Port Role
Display the current port role
Port State
Display the current port state
166