User Manual

25
1
2
Step 4: Lightly pull out the lower DIN-rail bracket rst and lift it up to remove it
from the track.
3.8.2 Wall-mount Plate Mounting
To install the Industrial Ethernet Extender on the wall, please follow the instructions
described below.
Step 1: Remove the DIN-rail bracket from the Industrial Ethernet Extender by
loosening the screws.
Step 2: Place the wall-mount plate on the rear panel of the Industrial Ethernet
Extender.
Step 3: Use the screws to screw the wall-mount plate on the Industrial Ethernet
Extender.
Step 4: Use the hook holes at the corners of the wall-mount plate to hang the
Industrial Ethernet Extender on the wall.
Step 5: To remove the wall-mount plate, reverse the steps above.