User Manual

24
Note
1. Before installation, please consider the distance and watts value
demand for PD devices. The LRP-201-KIT PoE output capacity
and upload / download performance depend on the length of UTP
cable.
2. As there are various resistance values in the UTP/telephone wire,
the actual data rate will vary on the quality of the copper wire and
environmental factors.
3. PoE output capacity is based on different DC Power Input / PoE
Input.
3.8 Mounting Installation
3.8.1 DIN-rail Mounting
The DIN-rail bracket is screwed on the Industrial Ethernet Extender when out of
factory. Please refer to following gures to hang the Industrial Ethernet Extender on
track.
Step 1: Hook the upper DIN-rail bracket on to the track.
1
2
Step 2: Get the lower DIN-rail bracket snapped into the track.
Step 3: Reverse the procedure to remove the Industrial Ethernet Extender from
the track.