User Manual

21
Step 3: Connect 48~54V DC power adapter to LRP-201HT power socket, then the
PWR LED of LRP-201HT and LRP-201ET should light up immediately.
Step 4: Connect Cat. 5e/6 UTP cable to LRP-201ET and IEEE 802.3at/bt complied
PoE IP camera or PoE wireless AP..
Note
1. Before installation, please consider the distance and watts value
demand for PD devices. The LRP-201-KIT PoE output capacity and
upload / download performance depend on the length of coaxial
cable.
2. As there are various resistance values in the category of RG-59/U
or RG-6/U cable, the actual data rate will vary on the quality of
the copper wire and environmental factors.
3. PoE output capacity is based on different DC Power Input / PoE
Input.
3.7 Applications of LRP-201-KIT with UTP/Telephone Wire
Type 1: LRP-201HT with PoE power input and LRP-201ET with PoE power output
LRP-201ET
Long Reach PoE Extender
Cat. 5e/6
PoE IP Camera
LRP-201HT
Long Reach PoE Injector
P1 P2 FAULT
PAIR
SYS
BNC
LRP Out
RJ45
PoE 30W 60W+
PoE Input
LRP-201HT
Injector
LNK/ACT
10/100/1000T
PoE In
802.3bt
Ultra PoE Switch
PoE
802.3bt PoE
Cat. 5e/6
PWR
PAIR
SYS
BNC
LRP In
RJ45
LNK/ACT
PoE-in-Use
10/100/1000T
LRP-201ET
Extender
Power over UTP
PoEPoE
Functions
LRP Injector LRP Extender
LRP-201HT LRP-201ET
Power Input
RJ45 with 802.3at/bt PoE
input
UTP with DC power over UTP
input
Power Output
UTP with DC power over UTP
output
RJ45 with 802.3at/bt PoE
output