User Manual
20
Note
1. Before installation, please consider the distance and watts value
demand for PD devices. The LRP-201-KIT PoE output capacity and
upload / download performance depend on the length of coaxial
cable.
2. As there are various resistance values in the category of RG-59/U
or RG-6/U cable, the actual data rate will vary on the quality of
the copper wire and environmental factors.
Type 2: One LRP-201HT with 48~54V power adapter and one LRP-201ET with PoE
power output
The
LRP Injector is powered via the external power adapter. The IEEE 802.3at/bt
compliant PoE PD will automatically be powered by the LRP Extender via UTP.
LRP-201ET
Long Reach PoE Extender
Cat. 5e/6
PoE IP Camera
LRP-201HT
Long Reach PoE Injector
P1 P2 FAULT
PAIR
SYS
BNC
LRP Out
RJ45
PoE 30W 60W+
PoE Input
LRP-201HT
Injector
LNK/ACT
10/100/1000T
PoE In
Ethernet Switch
802.3bt PoE
Cat. 5e/6
PWR
PAIR
SYS
BNC
LRP In
RJ45
LNK/ACT
PoE-in-Use
10/100/1000T
LRP-201ET
Extender
Power over Coaxial
AC-to-DC Adapter
75W/48~54V DC IN
110-240V AC
PoE
Functions
LRP Injector LRP Extender
LRP-201HT LRP-201ET
Power Input
Power adapter with 48~54V
DC in
BNC with DC power over coaxial
input
Power Output
BNC with DC power over coaxial
output
RJ45 with 802.3at/bt PoE
output
Installation Instructions
Step 1: Connect the LRP Injector (LRP-201HT) and LRP Extender (LRP-201ET) to
ends of BNC terminated coaxial cable.
Stick the “Warning Sticker” on the coaxial cable.
Step 2: Connect Cat. 5e/6 UTP cable to LRP-201HT and non-PoE switch or
workstation.