User Manual
19
3.6 Applications of LRP-201-KIT with coaxial cable
Type 1: One LRP-201HT with PoE power input and one LRP-201ET with PoE power
output
The
LRP Injector is powered via IEEE 802.3at/bt PoE. An IEEE 802.3at/bt compliant
PoE PD will automatically be powered by the LRP Extender via UTP.
LRP-201ET
Long Reach PoE Extender
Cat. 5e/6
PoE IP Camera
LRP-201HT
Long Reach PoE Injector
P1 P2 FAULT
PAIR
SYS
BNC
LRP Out
RJ45
PoE 30W 60W+
PoE Input
LRP-201HT
Injector
LNK/ACT
10/100/1000T
PoE In
802.3bt
Ultra PoE Switch
PoE
802.3bt PoE
Cat. 5e/6
PWR
PAIR
SYS
BNC
LRP In
RJ45
LNK/ACT
PoE-in-Use
10/100/1000T
LRP-201ET
Extender
Power over Coaxial
PoEPoE
Functions
LRP Injector LRP Extender
LRP-201HT LRP-201ET
Power Input
RJ45 with 802.3at/bt PoE
input
BNC with DC power over coaxial
input
Power Output
BNC with DC power over coaxial
output
RJ45 with 802.3at/bt PoE
output
Installation Instructions
Step 1: Connect the
LRP Injector (LRP-201HT) and LRP Extender (LRP-201ET) to
ends of BNC terminated coaxial cable.
Stick the “Warning Sticker” on the coaxial cable.
Step 2: Connect Cat. 5e/6 UTP cable to LRP-201HT and IEEE 802.3bt compliant
PoE Switch or PoE Injector. If the PoE switch or PoE injector is powered on
already, then the PWR LED of LRP-201HT and LRP-201ET should light up
immediately.
Step 3: Connect Cat. 5e/6 UTP cable to LRP-201ET and IEEE 802.3at/bt complied
PoE IP camera or PoE Wireless AP.
Warning
The LRP-201HT accepts IEEE 802.3bt device for optimal power injec-
tion. The other non-standard PoE power devices may cause the LRP-
201HT to malfunction.