User Manual

16
3. Installation
This section describes the functionalities of the Industrial 1-Port 10/100/1000T Ultra
PoE + 1-Port Coax/UTP Long Reach PoE Kit’s components and guides you to how to
install it on the desktop. Basic knowledge of networking is expected. Please read this
chapter completely before continuing.
3.1 Installation Precautions of Remote Power by Coaxial cable
As the LRP-201HT is a power over coaxial injector, it only can work with PLANET
power over coaxial extender, the LRP-201ET.
Caution
The package contains one Warning Sticker, which should be stuck
on the coaxial cable connector before using PLANET Long Reach PoE
over Coaxial Extender Kit.
Warning: This side of connector
contains electric power. Please be
careful before plugging into
the device.
Warning: This side of connector
contains electric power. Please be
careful before plugging into
the device.
Please stick the sticker on the connector going to the Receiver
Warning:
This side of connector
contains electric power. Please be
careful before plugging into
the device.
Please be reminded that the cable con
Do Not Touch
the Center Pin
3.2 Installation Precautions of Remote Power by UTP Cable
The LRP-201HT injector, when installed over an UTP cable, can only work with
PLANET LRP-201ET extender. Make sure non-PoE devices are not connected to the
Ethernet port or else it will cause damage to the devices.