User Manual

15
2.2.2 LRP-201ET Front Panel and LED Indicators
Figure 2-4 shows the front panel of the LRP-201ET.
PWR
PAIR
SYS
BNC
LRP In
RJ45
LNK/ACT
PoE-in-Use
10/100/1000T
LRP-201ET
Extender
Figure 2-4: LRP-201ET Front Panel
 System
LED Color Function
PWR Green Lit: Indicates the power is on.
SYS Green
Lit: Indicates the system is working.
O: Indicates the system is booting.
PAIR Green
Lit: Indicates the link is working between LRP-201-KIT.
O: Indicates the link is inactive.
 1000Mbps PoE-in-Use Slot
LED Color Function
LNK/ACT Green
Lit: Indicates the link through that port is successfully
established at 10/100/1000Mbps.
Blinks: Indicates that the Switch is actively sending or
receiving data over that port.
PoE-in-Use Orange Lit: Indicates the port is providing 56V DC in-line power.
 Button
Button Function
PAIR Press PAIR button during 3 seconds to join another LRP injector.
Reset
Hold the Reset button for about 10 seconds until the PAIR and SYS LEDs
are o, meaning the device has been reset to default setting.
2.2.3 LRP-201ET Bottom Panel
The reset button is found on the bottom panel of the LRP-201ET where Figure 2-5
shows.
Reset
Figure 2-5: LRP-201ET Bottom Panel