User Manual

13
1000Mbps PoE In Slot
LED Color Function
LNK/
ACT
Green
Lit: Indicates the link through that port is successfully
established at 10/100/1000Mbps.
Blinks: Indicates that the Switch is actively sending or
receiving data over that port.
PoE In Orange Lit: Indicates the RJ45 port is receiving the PoE power.
Button
Button Function
PAIR Press the PAIR button for 3 seconds to join another LRP extender.
Reset
Hold the Reset button for about 10 seconds until the PAIR and SYS LEDs
are o, meaning the device has been reset to default setting.
2.1.3. LRP-201HT Upper and Bottom Panels
The upper panel of the LRP-201HT consists of one terminal block connector
consisting of two DC power inputs. Figure 2-2 shows the upper panel of the
LRP-201HT.
Input
DC 48~54V
PWR1
PWR2
Fault
V1-V1+ V2+ V2-1A@24V
1 2 3 4 5 6
Figure 2-2: LRP-201HT Upper Panel
The bottom panel of the LRP-201HT consists of one reset button. Figure 2-3 shows
the bottom panel of the LRP-201HT.
Reset
Figure 2-3: LRP-201HT Bottom Panel