User Manual

10
Enclosure Metal case
Installation DIN-rail kit or wall-mount ear
Dimensions (W x D x H) 135 x 87.8 x 32mm
Weight 520g 510g
Power Requirements
 RJ45 PoE Input:
802.3at/bt 48~54V DC,
2.5A max.
 DC Input: 48~54V DC,
2.5A max.
 BNC Power over
Coaxial Input: 40~54V
DC, 1.8A max.
 RJ45 Power over
Ethernet Input:
40~54V DC, 1.8A
max.
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3bt 4-pair Power over Ethernet
IEEE 802.3at Power over Ethernet
Regulatory Compliance FCC Part 15 Class A, CE
Environment
Temperature
Operating: -20~70 degrees C
Storage: -30~75 degrees C
Humidity
Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
*1-1 Please do not connect any Ethernet device to LRP OUT Port of the LRP-
201HT; otherwise, it will damage the Ethernet device.
*1-2 Please do not connect any Ethernet device to LRP IN Port of the LRP-201ET;
otherwise, it will damage the Ethernet device.
*2 Depending on what the DC/PoE power input and the length of coaxial/UTP
cable are.
*3-1 Upload from LRP-201ET to LRP-201HT; download from LRP-201HT to LRP-
201ET.
*3-2 As there are various resistance values in the category of coaxial/UTP cable,
the actual data rate will vary on the quality of the copper wire and environ-
mental factors.