Datasheet

LRP-201-KIT
2
LRP-201ET
Long Reach PoE Extender
Cat. 5e/6
PoE IP Camera
LRP-201HT
Long Reach PoE Injector
P1 P2 FAULT
PAIR
SYS
BNC
LRP Out
RJ45
PoE 30W 60W+
PoE Input
LRP-201HT
Injector
LNK/ACT
10/100/1000T
PoE In
Ethernet Switch
802.3bt PoE
Cat. 5e/6
PWR
PAIR
SYS
BNC
LRP In
RJ45
LNK/ACT
PoE-in-Use
10/100/1000T
LRP-201ET
Extender
Power over Coaxial
AC-to-DC Adapter
75W/48~54V DC IN
110-240V AC
PoE
■ L RP-201HT:
Industrial 1-Port 10/100/1000T Ultra PoE PD + 1-Port Coax/UTP Long Reach PoE Injector
■ LRP-2 01E T:
Industrial 1-Port 10/100/1000T Ultra PoE PSE + 1-Port Coax/UTP Long Reach PoE Extender
The LRP-201HT can not only support dual power input (by DC adapter/PoE) but also transmit data and power over coaxial/UTP cable to the LRP-201ET,
which can be located as far as 600m away. It will then deliver the data and power output with a maximum of up to 60 watts to a PoE PD over an additional
100-meter long Ethernet cable, thus expediting the IP surveillance network or wireless LAN infrastructure in long distance. Both of the two products come in a
compact but rugged IP30 metal housing. Their DIN-rail/wall-mounted design ts easily in any space-limited location.
IP Ethernet and Power over Long Existing Coaxial/UTP Cable
A normal UTP cable can only be extended up to 100 meters, but with the LRP-201-KIT, the distance for PoE networking can be extended up to 600
meters (1,968ft.) when functioning with the LRP-201-KIT over 75 ohm coaxial cable or up to 400 meters (1,312ft.) over UTP with stable, high-quality video
transmission. It eliminates the need for additional remote site power while allowing a single power source to provide power to both LRP extenders and the
PoE PD at long range.
Up to 600m
Power
Data
PoE IP Cam
Coaxial Cable
PoE
Control Center
LRP-201HT
Injector
LRP-201ET
Extender
Functions
LRP Injector LRP Extender
LRP-201HT LRP-201ET
Power Input
Power adapter with 48~54V DC in or RJ45 with 802.3at/bt
PoE input
BNC with DC power over coaxial input or UTP with DC
power over UTP input
Power Output
BNC with DC power over coaxial output or UTP with DC
power over UTP output
RJ45 with 802.3at/bt PoE output
LAN Connection Ethernet or ultra PoE switch at head-end PoE PD