User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of LRP-822CS/LRP-1622CS
92
The page includes the following fields:
Object Description
Session ID
Display the session ID
Destination Port
This is the mirroring port entry
Ingress State
Display the ingress state
Source TX Port
Display the current TX ports
Source RX Port
Display the current RX ports
4.3.6 Jumbo Frame
his page provides to select the maximum frame size allowed for the switch port. The Jumbo Frame screens in Figure 4-3-11 & T
Figure 4-3-12 appear.
F
ds
igure 4-3-11 Jumbo Frame Setting Page Screenshot
The page includes the following fiel :
Object Description
Jumbo Frame (Bytes)
wed range is 64 bytes to 9216 bytes.
Enter the maximum frame size allowed for the switch port, including FCS.
The allo
Buttons
: Click to apply changes.
Figure 4-3-12 Jumbo Frame Information Page Screenshot
The page includes the following fields:
Object Description
Jumbo
Display the current maximum frame size