User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A
- EC Declaration of Conformity
User’s Manual of LRP-822CS/LRP-1622CS
349
The standard cable, RJ45 pin assignment
The st J45 recepta ector
There are 8 wires on a standard UTP/STP cable an wire is color-co he following shows the pin allocation and color
of straight-through cable and crossover cable conn :
andard R cle/conn
d each ded. T
ection
Straight-through Cable SIDE 1 SIDE 2
SIDE 1
12345678
12345678
SIDE 2
1 = White / Orange
2 = Orange
3 = White / Green
4 = Blue
8 = Brown
1 = White / Orange
2 = Orange
3 = White / Green
4 = Blue
8 = Brown
5 = White / Blue
6 = Green
7 = White / Brown
5 = White / Blue
6 = Green
7 = White / Brown
Crossover Cable SIDE 1 SIDE 2
SIDE 1
12345678
12345678
SIDE 2
1 = White / Orange
ge
3 = White /
4 =
5 = W
Brown
1 = White / Green
2 = Green
3 = White / Orange
4 = Blue
5 = White / Blue
6 = Orange
7 = White / Brown
8 = Brown
2 = Oran
Green
Blue
hite / Blue
6 = Green
7 = White /
8 = Brown
Figure A-1: Straight-through and Crossover Cable
Please make sure nnected ith the same pin assignment and color as the above table before deploying the
ables into your network.
your co cables are w
c